62 Chevy Fullsize Clutch Linkage

1962 Chevrolet Passenger Car Clutch Release Linkage

3813224
0.787 ROD, Clutch Fork Release
1962 Chevrolet Passenger Car Assembly Manual (Sect.6, Sheet 25.00)
This rod goes from the inner z bar lever.

3813228
0.787 SWIVEL, Fork
(1 21/64" x 3/8" from base of shoulder to end)
1962 Chevrolet Passenger Car Assembly Manual (Sect.6, Sheet 25.00)
This swivel goes into the fork.

838090
WASHER, Plain 3/8" I.D. x 13/16" O.D.
1962 Chevrolet Passenger Car Assembly Manual (Sect.6, Sheet 25.00)
This washer goes between the fork and retaining
clip on the fork swivel.

3813225
0.787 SWIVEL, Pedal Push Rod
(1 9/32" O.L w/25/64" dia. hole), clutch fork push rod
1962 Chevrolet Passenger Car Assembly Manual (Sect.6, Sheet 25.00)
This swivel is used to adjust the clutch free play,
it goes on the clutch pedal push rod (upper).

3749084
0.787 CLIP, Push Rod and Swivel (4)
1962 Chevrolet Passenger Car Assembly Manual (Sect.6, Sheet 24.00)
1962 Chevrolet Passenger Car Assembly Manual (Sect.6, Sheet 25.00)
Pedal push rod to pedal, pedal push rod to z bar,
swivel to fork, and fork push rod to z bar.

3748358
4.017 WASHER, Push Rod Lever Thrust (21/64")
1962 Chevrolet Passenger Car Assembly Manual (Sect.6, Sheet 24.00)
Pedal push rod to pedal.

3821019

0.829 SEAL, Pedal push rod dash

1962 Chevrolet Passenger Car Assembly Manual (Sect.9, Sheet 3.00)

3813227
0.844 SPRING, Retaining
(8 13/32 free length-20 coils) push rod
1962 Chevrolet Passenger Car Assembly Manual (Sect.6, Sheet 25.00)
This anti-rattle spring goes from a hole in the
inside z bar lever to a hole in the top of the
clutch release fork.

3813226
0.844 SPRING, Push Rod
(6 7/64" free length-32 coils)
1962 Chevrolet Passenger Car Assembly Manual (Sect.6, Sheet 24.00)
Z-bar to firewall.

3743349
0.851 SEAT, Stud 7/8" dia.)
1962 Chevrolet Passenger Car Assembly Manual (Sect.6, Sheet 25.00)
One of these goes on each side of the frame side
ball stud. None go on the engine side ball stud.

3750696
0.851 SPRING, frame stud seat, retaining (1" O.D.)
1962 Chevrolet Passenger Car Assembly Manual (Sect.6, Sheet 25.00)
This spring goes inside the z bar and holds the
frame side ball stud and seats together.

3816340
0.851 STUD, to engine
1962 Chevrolet Passenger Car Assembly Manual (Sect.6, Sheet 24.00)
History:
3816340 use 3866568 07-66

3735630
0.851 STUD, to frame (3/8"-24 x 1 13/16" O.L.)
1962 Chevrolet Passenger Car Assembly Manual (Sect.6, Sheet 25.00)
This is the frame side ball stud,
History:
382661 replaced 3736530 08-65
382661 use 3898610 04-67

3743360
0.851 WASHER, stud dust seal, L.H. to frame
(felt-9/16" I.D. x 1 3/8" O.D.)
1962 Chevrolet Passenger Car Assembly Manual (Sect.6, Sheet 25.00)
This grease seal goes over the frame side ball stud
between the z-bar and the frame bracket.

3756326
0.851 WASHER, Stud to frame
1962 Chevrolet Passenger Car Assembly Manual (Sect.6, Sheet 25.00)
This special washer goes on the frame side ball
stud, and one of the tabs are bent over to lock
the nut in place.

124925
8.916 NUT, Hexagon lock nut
Size: 3/8"-24
Plating: Cadmium
1962 Chevrolet Passenger Car Assembly Manual (Sect.6, Sheet 25.00)
This 3/8"-24 lock nut fastens the ball stud to the
frame bracket.

3813221

0.852 LEVER. w/shaft

1962 Chevrolet Passenger Car Assembly Manual (Sect.6, Sheet 25.00)

3846881
0.852 LEVER. w/shaft
This z-bar is used for all except 409 cubic inch
engine. (Chevy Parts Books)

3816061

0.852 LEVER. w/shaft

W/409 Engine

1962 Chevrolet Passenger Car Assembly Manual (Sect.580, Sheet 1.00)

3846883
0.852 LEVER. w/shaft

W/409 Engine (Chevy Parts Books)

109461
8.984 Fitting, Grease
1962 Chevrolet Passenger Car Assembly Manual (Sect.6, Sheet 25.00)
This is the correct grease fitting, that goes into
the z bar. Optional numbers are 191758 and
371295.

3767983
0.852 BRACKET, Shaft Frame
1962 Chevrolet Passenger Car Assembly Manual (Sect.6, Sheet 24.00)
Welds to outside of frame.
Picture is of a used OEM part.

3813223
0.854 ROD, Clutch Pedal Push
(21 1/4" dev. length)( 3/8"-16 thd. on end)
This is the upper rod, that goes from the
pedal to the outer z-bar arm.
1962 Chevrolet Passenger Car Assembly Manual (Sect.6, Sheet 24.00)

120377
8.915 NUT, Hexagon (2)
Size: 3/8"-16
Plating: Cad.
1962 Chevrolet Passenger Car Assembly Manual (Sect.6, Sheet 25.00)
These nuts go on each side of part #3813223
swivel to lock it in place.

Disclaimer:
Factory correct applications are your responsibility. GM made part and part # changes with no rhyme but a reason (no production interruptions at any cost).
Application charts are for replacement parts that were available at the time of parts book printing.
My observations come from the parts I have in my collection or other reliable sources your parts may differ.
If Factory correctness is your goal, do more research, join car clubs,
forums and buy an assembly manual if one is available for your Project Car (you wont be sorry).
This is a fun and interesting part of the hobby!