68-72 Chevelle Clutch Linkage
1968-72 Chevrolet A Body * Clutch Release Linkage
* 68-72 Chevelle, 68-72 El Camino, 70-72 Monte Carlo
68-72 Chevrolet A Body Clutch Linkage
Chevelle and El Camino models use the same
parts, while Monte Carlos use a different frame
bracket.
9779202
0.787 ROD, Fork Push
68-72 (Parts Books)
68 Chevelle, El Camino (Assembly Manual)
69 Chevelle, El Camino (Assembly Manual)
70 Chevelle, El Camino, Monte Carlo (Assembly Manual 7-C3)
71 Chevelle, El Camino, Monte Carlo (Assembly Manual 7B-3)
This rod is used with part # 3840845 swivel to
adjust the clutch free play.
(My part # 85)
3840845
0.787 SWIVEL, Fork Push Rod
68-72 (Parts Books)
adjust the clutch free play.
(My part # 85)
3840845
0.787 SWIVEL, Fork Push Rod
68-72 (Parts Books)
68 Chevelle, El Camino (Assembly Manual)
69 Chevelle, El Camino (Assembly Manual)
70 Chevelle, El Camino, Monte Carlo (Assembly Manual 7-C3)
71 Chevelle, El Camino, Monte Carlo (Assembly Manual 7B-3)
This part and part # 9779202 are used as a unit
and go from the lower lever on the zbar to a
pocket in the clutch release fork.
(My part #76)
124829
8.915 NUT, Hexagon
Thread size: 3/8"-16
Grade: 286M
Thickness: 7/32"
Finish: Zinc
and go from the lower lever on the zbar to a
pocket in the clutch release fork.
(My part #76)
124829
8.915 NUT, Hexagon
Thread size: 3/8"-16
Grade: 286M
Thickness: 7/32"
Finish: Zinc
68 Chevelle, El Camino (Assembly Manual)
69 Chevelle, El Camino (Assembly Manual)
70 Chevelle, El Camino, Monte Carlo (Assembly Manual 7-C3)
71 Chevelle, El Camino, Monte Carlo (Assembly Manual 7B-3)
This hex nut goes on the end of the fork push
rod and against the swivel to lock clutch release
adjustment.
3749084 (3)
0.787 RETAINER, Push Rod and Swivel
68-72
rod and against the swivel to lock clutch release
adjustment.
3749084 (3)
0.787 RETAINER, Push Rod and Swivel
68-72
68 Chevelle, El Camino (Assembly Manual)
69 Chevelle, El Camino (Assembly Manual)
70 Chevelle, El Camino, Monte Carlo (Assembly Manual 7-C2 and 7-C3)
71 Chevelle, El Camino, Monte Carlo (Assembly Manual 7B-2 and 7B-3)
This spring clip is used on both ends of the
clutch pedal push rod and one end of the fork
push rod.
(My part #87)
3892632
0.795 FORK ASSY., Clutch Release
68-72 (Parts Books)
(My part #27)
3992305
0.796 BRACKET, Pull back
71-72 (Parts Books)
clutch pedal push rod and one end of the fork
push rod.
(My part #87)
3892632
0.795 FORK ASSY., Clutch Release
68-72 (Parts Books)
(My part #27)
3992305
0.796 BRACKET, Pull back
71-72 (Parts Books)
71 Chevelle, El Camino, Monte Carlo (Assembly Manual 7B-3) *Note 1
This bracket bolts to the frame and the part
# 3992306 clutch return spring is attached
to it.
(My part #522)
399904
0.829 SEAL ASSY., Clutch Pedal Push Rod
68-72 (Parts Books)
This bracket bolts to the frame and the part
# 3992306 clutch return spring is attached
to it.
(My part #522)
399904
0.829 SEAL ASSY., Clutch Pedal Push Rod
68-72 (Parts Books)
68 Chevelle, El Camino (Assembly Manual)
69 Chevelle, El Camino (Assembly Manual)
70 Chevelle, El Camino, Monte Carlo (Assembly Manual 7-C2)
71 Chevelle, El Camino, Monte Carlo (Assembly Manual 7B-2 )
(My part's #251 and part #264 or part of #538 kit)
3920614
0.844 SPRING, Fork Pull Back
68-70 (Parts Books)
3920614
0.844 SPRING, Fork Pull Back
68-70 (Parts Books)
69 Chevelle, El Camino (Assembly Manual)
70 Chevelle, El Camino, Monte Carlo (Assembly Manual 7-C3)
71 Chevelle, El Camino, Monte Carlo (Assembly Manual 7B-3) *Note 1
This spring goes from the clutch release fork toa hole in the frame.
(My part #517)
3992306
0.844 SPRING, Fork Pull Back
71-72 (Parts Books)
71 Chevelle, El Camino, Monte Carlo (Assembly Manual 7B-3) *Note 1
This spring goes from the clutch release fork to
the part # 3992305 bracket.
(My part #518)
3743349 (2)
0.851 SEAT, Stud
68-72 (Parts Books)
This spring goes from the clutch release fork to
the part # 3992305 bracket.
(My part #518)
3743349 (2)
0.851 SEAT, Stud
68-72 (Parts Books)
68 Chevelle, El Camino (Assembly Manual)
69 Chevelle, El Camino (Assembly Manual)
70 Chevelle, El Camino, Monte Carlo (Assembly Manual 7-C3)
71 Chevelle, El Camino, Monte Carlo (Assembly Manual 7B-3)
(My part #296)
3898610
0.851 STUD, Lever Shaft to Frame
68-72 (Parts Books)
History:
382661 use 3898610 04-67
3898610
0.851 STUD, Lever Shaft to Frame
68-72 (Parts Books)
History:
382661 use 3898610 04-67
68 Chevelle, El Camino (Assembly Manual)
69 Chevelle, El Camino (Assembly Manual)
(My part #286)
3935289
0.851 STUD, Lever Shaft to Frame
70 Chevelle, El Camino, Monte Carlo (Assembly Manual 7-C3)
71 Chevelle, El Camino, Monte Carlo (Assembly Manual 7B-3)
3750696
0.851 SPRING, Stud Seat Retaining (1" O.D.)
68-72 (Parts Books)
3750696
0.851 SPRING, Stud Seat Retaining (1" O.D.)
68-72 (Parts Books)
68 Chevelle, El Camino (Assembly Manual)
69 Chevelle, El Camino (Assembly Manual)
70 Chevelle, El Camino, Monte Carlo (Assembly Manual 7-C3)
71 Chevelle, El Camino, Monte Carlo (Assembly Manual 7B-3)
(My part #287)
3743360
0.851 WASHER, Stud Dust Seal (felt)
68-72 (Parts Books)
3743360
0.851 WASHER, Stud Dust Seal (felt)
68-72 (Parts Books)
68 Chevelle, El Camino (Assembly Manual)
69 Chevelle, El Camino (Assembly Manual)
70 Chevelle, El Camino, Monte Carlo (Assembly Manual 7-C3)
71 Chevelle, El Camino, Monte Carlo (Assembly Manual 7B-3)
(My part #93)
382588*
8.929 WASHER, Flat
Hole size: 3/8"
Outside Diameter: 1"
Thickness: .01"
Finish: Phos.
History:
382588 to 3914674 6/73
382588*
8.929 WASHER, Flat
Hole size: 3/8"
Outside Diameter: 1"
Thickness: .01"
Finish: Phos.
History:
382588 to 3914674 6/73
68 Chevelle, El Camino (Assembly Manual)
69 Chevelle, El Camino (Assembly Manual)
70 Chevelle, El Camino, Monte Carlo (Assembly Manual 7-C3)
71 Chevelle, El Camino, Monte Carlo (Assembly Manual 7B-3)
*The description is of part # 3914674 that
superseded # 382588.
This oversize washer goes on the frame side
z bar stud, between the part #3743360 felt seal
superseded # 382588.
This oversize washer goes on the frame side
z bar stud, between the part #3743360 felt seal
and the part #3918098 frame bracket.
138489
8.932 WASHER, External tooth lock
Hole size: 3/8"
Outside Diameter: 11/16"
Finish: Cad. or Zinc
68 Chevelle, El Camino (Assembly Manual)
69 Chevelle, El Camino (Assembly Manual)
70 Chevelle, El Camino, Monte Carlo (Assembly Manual 7-C3)
71 Chevelle, El Camino, Monte Carlo (Assembly Manual 7B-3)
This external tooth lock washer goes on the frame
side z bar stud, between between the frame bracket
and nut on the outside of the frame bracket.
9418931*
3/8"-16 Nut
This external tooth lock washer goes on the frame
side z bar stud, between between the frame bracket
and nut on the outside of the frame bracket.
9418931*
3/8"-16 Nut
68 Chevelle, El Camino (Assembly Manual)
69 Chevelle, El Camino (Assembly Manual)
70 Chevelle, El Camino, Monte Carlo (Assembly Manual 7-C3)
71 Chevelle, El Camino, Monte Carlo (Assembly Manual 7B-3)
* No description available.
This hex nut goes on the frame side ball stud to
tighten the stud to the frame bracket.
3866568
0.851 STUD, Lever Shaft Ball to Engine
68-72 (Parts Books)
This hex nut goes on the frame side ball stud to
tighten the stud to the frame bracket.
3866568
0.851 STUD, Lever Shaft Ball to Engine
68-72 (Parts Books)
68 Chevelle, El Camino (Assembly Manual)
69 Chevelle, El Camino (Assembly Manual)
70 Chevelle, El Camino, Monte Carlo (Assembly Manual 7-C3)
71 Chevelle, El Camino, Monte Carlo (Assembly Manual 7B-3)
(My part #273)
3920615
0.852 LEVER, Clutch Pedal-intermediate
68-72 (Parts Books)
3920615
0.852 LEVER, Clutch Pedal-intermediate
68-72 (Parts Books)
68 Chevelle, El Camino (Assembly Manual)
69 Chevelle, El Camino (Assembly Manual)
70 Chevelle, El Camino, Monte Carlo (Assembly Manual 7-C3)
71 Chevelle, El Camino, Monte Carlo (Assembly Manual 7B-3)
69 Chevelle, El Camino (Assembly Manual)
70 Chevelle, El Camino (Assembly Manual 7-C3)
71 Chevelle, El Camino (Assembly Manual 7B-3)
(My part #357)39272641
0.852 BRACKET, Lever and Shaft to Frame
70 (13857-67) (Assembly Manual 7-C3)
9423284
8.977 SCREW, Hexagon washer head tapping
Size: 5/16"-12
Length: 7/8"
Finish: Phos.
71 Chevelle/Monte Carlo/El Camino frame and spring bracket (1971 Assembly Manual) *Note 1
(My part #431)
(My part #431)
9419402
8.977 SCREW, Hexagon Washer Head Tapping
Size: 5/16-18
Length: 3/4"
Finish: Phos.
68 Chevelle, El Camino (Assembly Manual)
69 Chevelle, El Camino (Assembly Manual)
70 Chevelle, El Camino, Monte Carlo (Assembly Manual 7-C3)
71 Chevelle/Monte Carlo/El Camino frame and spring bracket (Assembly Manual)*Note 1
(My part #435)
3920618
0.854 ROD, Clutch Pedal
68-72 (Parts Books)
68 Chevelle, El Camino (Assembly Manual)
69 Chevelle, El Camino (Assembly Manual)
70 Chevelle, El Camino, Monte Carlo (Assembly Manual 7-C2)
71 Chevelle, El Camino, Monte Carlo (Assembly Manual 7B-2)
This is the clutch pedal push rod. It is attachedto the clutch pedal bracket on one end and the
upper zbar lever on the other.
(My part #115)
*Note 1:
The 1971 Chevelle Assembly manual has 2 sheet 7B-3's
one sheet shows two part # 9423284 screws used on the
part #3918098 frame bracket and one on the part # 3992305
return spring bracket with part # 3992306 return spring. The
other sheet shows two part # 9419402 screws attaching the
frame bracket, no return spring bracket and part # 3920614
return spring.
Factory correct applications are your responsibility. GM made part and part # changes with no rhyme but a reason (no production interruptions at any cost).
Application charts are for replacement parts that were available at the time of parts book printing.
My observations come from the parts I have in my collection or other reliable sources your parts may differ.
If Factory correctness is your goal, do more research, join car clubs,
forums and buy an assembly manual if one is available for your Project Car (you wont be sorry).
This is a fun and interesting part of the hobby!
