68-72 F85 Clutch Linkage
1968-72 Oldsmobile A Body Clutch Linkage
401080
0.854 ROD, Clutch release upper
1968 Cutlass/442 Assembly Manual (Sect. 7, Page 110)
401080
0.854 ROD, Clutch release upper
1968 Cutlass/442 Assembly Manual (Sect. 7, Page 110)
1969 Cutlass/442 Assembly Manual (Sect. 7, Page 110)
Note: Big bushing zbar end, no bushing at pedal.
406171
0.854 ROD, Clutch release upper
406171
0.854 ROD, Clutch release upper
1970 Cutlass/442 Assembly Manual (Sect. 7, Page 102)
1971 Cutlass/442 Assembly Manual (Sect. 7, Page 130)
1972 Cutlass/442 Assembly Manual (Sect. 7, Page 130)
Note: 406172 bushing both ends.
1351769 (2)
0.854 RETAINER, Clutch pedal release rod,
to equalizer and pedal (hairpin type)
68-69 F85 (Olds Parts Book)
(68 Cutlass/442 Assembly Manual)
These hairpin clips go on each end of the
clutch pedal push rod
382105 (2)
0.854 WASHER, Rod to equalizer and pedal
68-71 F85 (Olds Parts Book)
68-69 F85 (Olds Parts Book)
(68 Cutlass/442 Assembly Manual)
(69 Cutlass/442 Assembly Manual)
(70 Cutlass/442 Assembly Manual)
(71 Cutlass/442 Assembly Manual)
(72 Cutlass/442 Assembly Manual)
clutch pedal push rod
382105 (2)
0.854 WASHER, Rod to equalizer and pedal
68-71 F85 (Olds Parts Book)
(68 Cutlass/442 Assembly Manual)
(69 Cutlass/442 Assembly Manual)
This spring washer is shown in the 69 assembly
manual only on the equalizer end of the pedal
push rod, but I believe they should be used
whenever a hairpin retainer is used in place
of a "G" clip.
406172
0.854 BUSHING, Rod to arm-plastic
70-72 F85 (Olds Parts Book)
(70 Cutlass/442 Assembly Manual)
(71 Cutlass/442 Assembly Manual)
(72 Cutlass/442 Assembly Manual)
manual only on the equalizer end of the pedal
push rod, but I believe they should be used
whenever a hairpin retainer is used in place
of a "G" clip.
406172
0.854 BUSHING, Rod to arm-plastic
70-72 F85 (Olds Parts Book)
(70 Cutlass/442 Assembly Manual)
(71 Cutlass/442 Assembly Manual)
(72 Cutlass/442 Assembly Manual)
This bushing goes into the part #406169 zbar atthe clutch pedal rod attachment hole.
3918098
0.852 BRACKET, Equalizer
68-72 F85 (Olds Parts Book)
(68 Cutlass/442 Assembly Manual)
(69 Cutlass/442 Assembly Manual)
(70 Cutlass/442 Assembly Manual)
(71 Cutlass/442 Assembly Manual)
(72 Cutlass/442 Assembly Manual)
9423284 (2)
8.977 SCREW, Hex head tapping
Size: 5/16"-12 x 7/8"
Finnish: Phos.
(68 Cutlass/442 Assembly Manual)
(69 Cutlass/442 Assembly Manual)
(70 Cutlass/442 Assembly Manual)
(71 Cutlass/442 Assembly Manual)
(72 Cutlass/442 Assembly Manual)
bracket to the frame, using the existing holes.
401077
0.852 EQUALIZER ASSY.
68-69 F85 (Olds Parts Book)
(68 Cutlass/442 Assembly Manual)
(69 Cutlass/442 Assembly Manual)
406169
0.852 EQUALIZER ASSY.
70-72 F85 (Olds Parts Book)
(70 Cutlass/442 Assembly Manual)
(71 Cutlass/442 Assembly Manual)
(72 Cutlass/442 Assembly Manual)
9792216
8.929 WASHER, Flat (Inside Zbar)
(68 Cutlass/442 Assembly Manual)
(69 Cutlass/442 Assembly Manual)
(70 Cutlass/442 Assembly Manual)
(71 Cutlass/442 Assembly Manual)
(72 Cutlass/442 Assembly Manual)
and the part # 3744449 seat, rests on it.
History:
9792216
to 3702807
Hole size: 9/16"
Outside diameter: 7/8"
Thickness: 5/63"
Finish: Plain
3743349 (2)
0.851 SEAT, Equal stud to brkt. (Nylon)
68-72 F85 (Olds Parts Book)
(68 Cutlass/442 Assembly Manual)
382661
0.851 STUD, Equal. to frame
(68 Cutlass/442 Assembly Manual)
3935289
0.851 STUD, Equal. to frame
68-72 F85 (Olds Parts Book)
Outside diameter: 7/8"
Thickness: 5/63"
Finish: Plain
3743349 (2)
0.851 SEAT, Equal stud to brkt. (Nylon)
68-72 F85 (Olds Parts Book)
(68 Cutlass/442 Assembly Manual)
(69 Cutlass/442 Assembly Manual)
(70 Cutlass/442 Assembly Manual)
(71 Cutlass/442 Assembly Manual)
(72 Cutlass/442 Assembly Manual)
382661
0.851 STUD, Equal. to frame
(68 Cutlass/442 Assembly Manual)
(69 Cutlass/442 Assembly Manual)
3935289
0.851 STUD, Equal. to frame
68-72 F85 (Olds Parts Book)
(70 Cutlass/442 Assembly Manual)
(71 Cutlass/442 Assembly Manual)
(72 Cutlass/442 Assembly Manual)
3750696
0.851 SPRING, Stud retg.
68-72 F85 (Olds Parts Book)
(68 Cutlass/442 Assembly Manual)
(69 Cutlass/442 Assembly Manual)
(70 Cutlass/442 Assembly Manual)
(71 Cutlass/442 Assembly Manual)
(72 Cutlass/442 Assembly Manual)
3816341
0.851 STUD, Equal to eng.
68-72 F85 (Olds Parts Book)
(68 Cutlass/442 Assembly Manual)
(69 Cutlass/442 Assembly Manual)
(70 Cutlass/442 Assembly Manual)
(71 Cutlass/442 Assembly Manual)
(72 Cutlass/442 Assembly Manual)
3733360
0.851 WASHER, Stud to frame
(felt 9/16" I.D. x 3/4" O.D.)
68-72 F85 (Olds Parts Book)
(68 Cutlass/442 Assembly Manual)
(69 Cutlass/442 Assembly Manual)
(70 Cutlass/442 Assembly Manual)
(71 Cutlass/442 Assembly Manual)
(72 Cutlass/442 Assembly Manual)
382658
0.851 SEAL, Equal. to eng. stud (rubber 1/2" I.D. x 7/8" O.D.)
68-72 F85 V8 (Olds Parts Book)
(68 Cutlass/442 Assembly Manual)
(69 Cutlass/442 Assembly Manual)
(70 Cutlass/442 Assembly Manual)
(71 Cutlass/442 Assembly Manual)
(72 Cutlass/442 Assembly Manual)
138489
0.851 WASHER, Ball stud to brkt. (LH- steel)
(68 Cutlass/442 Assembly Manual)
(69 Cutlass/442 Assembly Manual)
(70 Cutlass/442 Assembly Manual)
(71 Cutlass/442 Assembly Manual)
(72 Cutlass/442 Assembly Manual)
3914674
0.851 WASHER, Equalizer stud to frame brkt.
69-72 F85 S.T. (Olds Parts Book)
382588
0.851 WASHER, Equalizer stud to frame brkt.
0.851 WASHER, Equalizer stud to frame brkt.
(69 Cutlass/442 Assembly Manual)
(70 Cutlass/442 Assembly Manual)
(71 Cutlass/442 Assembly Manual)
(72 Cutlass/442 Assembly Manual)
9414034
NUT, Stud to Frame
(68 Cutlass/442 Assembly Manual)
9418931
NUT, Stud to Frame
NUT, Stud to Frame
(69 Cutlass/442 Assembly Manual)
(70 Cutlass/442 Assembly Manual)
(71 Cutlass/442 Assembly Manual)
(72 Cutlass/442 Assembly Manual)
9418931 to 9414034
388910
0.846 BRACKET, Return Spring
68-72 V8 (Olds Parts Book)
(68 Cutlass/442 Assembly Manual)
Shown but not listed in the following manuals.
(69 Cutlass/442 Assembly Manual)
(70 Cutlass/442 Assembly Manual)
(71 Cutlass/442 Assembly Manual)
(72 Cutlass/442 Assembly Manual)
388911
0.844 SPRING, Clutch return (3/4" x 5 5/32" - 39 1/2 coils)
68-72 F85 V8 (Olds Parts Book)
(68 Cutlass/442 Assembly Manual)
(69 Cutlass/442 Assembly Manual)
(70 Cutlass/442 Assembly Manual)
(71 Cutlass/442 Assembly Manual)
(72 Cutlass/442 Assembly Manual)
399904
0.829 SEAL, Release rod to dash
68-72 F85 (Olds Parts Book)
68 Cutlass-442 (68 Assembly Manual)
397116
0.795 EXTENSION, Fork
68-72 ALL (Olds Parts Book)
(68 Cutlass/442 Assembly Manual)
(69 Cutlass/442 Assembly Manual)
(70 Cutlass/442 Assembly Manual)
(71 Cutlass/442 Assembly Manual)
(72 Cutlass/442 Assembly Manual)
9787069
0.795 FORK, Clutch release
68-72 ALL (Olds Parts Book)
3749084
0.787 RETAINER, Rod ("G" shape)
Clutch fork push rod to equalizer.
(68 Cutlass/442 Assembly Manual)
9779202
0.787 ROD, Lower adjusting
68-72 ALL (Olds Parts Book)
(68 Cutlass/442 Assembly Manual)
124829
0.787 NUT, Fork rod adjusting
(68 Cutlass/442 Assembly Manual)
3840845
0.787 SWIVEL, Clutch release rod to equalizer arm
68-72 S.T. (Olds Parts Book)
(68 Cutlass/442 Assembly Manual)
(68 Cutlass/442 Assembly Manual)
(69 Cutlass/442 Assembly Manual)
(70 Cutlass/442 Assembly Manual)
(71 Cutlass/442 Assembly Manual)
(72 Cutlass/442 Assembly Manual)
9779202
0.787 ROD, Lower adjusting
68-72 ALL (Olds Parts Book)
(68 Cutlass/442 Assembly Manual)
(69 Cutlass/442 Assembly Manual)
(70 Cutlass/442 Assembly Manual)
(71 Cutlass/442 Assembly Manual)
(72 Cutlass/442 Assembly Manual)
124829
0.787 NUT, Fork rod adjusting
(68 Cutlass/442 Assembly Manual)
(69 Cutlass/442 Assembly Manual)
(70 Cutlass/442 Assembly Manual)
(71 Cutlass/442 Assembly Manual)
(72 Cutlass/442 Assembly Manual)
3840845
0.787 SWIVEL, Clutch release rod to equalizer arm
68-72 S.T. (Olds Parts Book)
(68 Cutlass/442 Assembly Manual)
(69 Cutlass/442 Assembly Manual)
(70 Cutlass/442 Assembly Manual)
(71 Cutlass/442 Assembly Manual)
(72 Cutlass/442 Assembly Manual)
Disclaimer:
Factory correct applications are your responsibility. GM made part and part # changes with no rhyme but a reason (no production interruptions at any cost).
Application charts are for replacement parts that were available at the time of parts book printing, and when possible model specific assembly manuals.
My observations come from the parts I have in my collection or other reliable sources your parts may differ.
If Factory correctness is your goal, do more research, join car clubs,
forums and buy an assembly manual if one is available for your Project Car (you wont be sorry).
This is a fun and interesting part of the hobby!
