68-72 Lemans Pedal Assembly

1968-72 Pontiac A Body Pedal Assembly

Below I have pictures and part numbers
(that I have Found) for a 1968-72 Pontiac A Body
Pedal Assembly. This assembly is from a 1969 GTO.
This will be an on going process, so stop back for
updates. Green notations indicate the parts are for the
listed applications. Most of these parts are do not have
there numbers on them and as such I can only be
90% sure of their correctness. Part numbers used
in these descriptions are for replacement parts and
may or may not be factory correct.


546259
4.634 BRACKET (hanger)
67-72 Pontiac A


399803
0.833 (8.900) BOLT,Clutch Pedal Pivot
(7/16"-14 x 4 7/16")
When converting to manual transmission you
will need this bolt automatic cars have a
shorter version.
The above picture is of a new GM part.
67-72 Pontiac A


9422299
0.833 (8.916) NUT, clutch pedal pivot
(7/16"-14 hex lock)
This is a 7/16"-14 lock nut. It holds the pedal
assembly together.
67-72 Pontiac A


529323
0.852 (4.626) SPACER, Clutch Pedal
This assembly uses two (2) of these one in each
pedal. These spacers allow the clutch and brake
pedals to swing after tightening the pivot bolt
and nut.
67-72 Pontiac A


1247439
0.831 (4.626) BUSHING, Clutch Pedal Shaft (nylon)
These are the white plastic bushings that fit between
the spacer and pedal on on both the brake and clutch
pedals. (4 required)
67-72 Pontiac A


1231313
0.830 PEDAL,Clutch
67-72 Pontiac A


1386088
4.625 PEDAL, Brake
67-72 Pontiac A


3886907
2.447 SWITCH.,Stop light
This switch was in the bracket below with one hole.
This is from a non cruise control car.
(exc. cruise cont.)


9794682
2.447 SWITCH ASM., Stop Light
ALL V/8 (w/cruise cont. release)


1361699
2.447 CLIP, Stop Light to Bracket
68 (exc. cruise control) 69-72 ALL


1385520
2.447 BRACKET, Stop Light Switch
This bracket has one hole and is from a 4 speed
car, therefore I am assuming this is the non cruise
bracket.
(Exc. A.C. & Cruise Cont.)


403878
2.447 BRACKET, Stop Light Switch
(w/cruise cont.)


8.977 SCREW,Bracket to MTG. Bracket
(1/4"-14 x 1/2")
This screw holds the stop light switch bracket to
the pedal hanger.


5468524
4.662 CLEVIS,Master Cyl. Push Rod
This clevis attaches the brake master cylinder rod
to the pedal.
History :5468524 replaced 397165 10-68
               3953288 replaced 546824 01-71


3817880
4.662 RETAINER, Master Cyl. Clevis to Pedal
This spring clip keeps the brake rod clevis on the
pin.


3817879
4.622 PIN, Master Cyl. Clevis to Pedal
This pin attaches the brake rod clevis to the brake
pedal via a hole in the pedal.


1380966
0.829 BUMPER, Clutch Pedal Stop


4.630 PAD, Brake and Clutch Pedal


9778267
4.630 PLATE, Brake and Clutch Pedal Pad Trim
I don't know if this part # is correct. The replacement
parts book lists a Chevy style pedal pad.


1993485
4.054 Switch & Bracket Assembly,
Transmission Neutral Safety
This is a clutch pedal operated safety switch.
Without this switch the car can be started with the
car in gear and the clutch engaged.
69-72 Pontiac A


3954289
4.054 BUSHING, clutch operated neutral start switch
69-72 Pontiac A


3908243
4.054 CLIP, Neutral Safety Switch Bushing Retainer
69-72 Pontiac A


6299268
4.054 WIRE ASM., neut. switch
69-71 Pontiac A


8910502
4.054 WIRE ASM., neut. & seat belt warn. sw.
72 Pontiac A