#9774625
General Motors Part Number 9774625 Clutch Push Rod
New Old Stock
Pictures, descriptions and measurements are
from a N.O.S part.
Pedal End
Zbar End
Measurement
From center of pin to center of pin is
approximately 13".
Part Tag
This discontinued GM part came with it's tag attached.
Applications
9774625
0.854 ROD, Pedal Push
1965 Chevelle and El Camino Assembly Manual (UPC 7, Sheet C2.)
1966 Chevelle and El Camino Assembly Manual (UPC 7, Sheet C2)
64-65 T/6 S.T. (Pontiac Parts Books)
66 T/6 S.T. (Pontiac Parts Books)
Below are some of the references to this and other
part numbers in GM parts books. (The dates of the
parts catalogs are in parenthesis.)
This is not a straight shaft and is about 13 1/2" in overall length.
9774625
0.854 ROD, Pedal Push straight shaft (12 51/64 O.L.)
64-67 Chevelle (Oct. 1966) (July 1967) (Nov.1967) (Oct. 1970)
64-66 Chevelle (Oct. 1965)
64-67 Chevelle (283)(327)(396) (4/81) (4/77)
64-67 Chevelle (6 cyl.) (Feb. 1969) (4/81) x
History:
9774625 64-67 straight shaft (12 51/64" O.L.) replaced 3840835 08-65
Discontinued
3900524
0.854 ROD, Pedal Push (12 43/64 dev. Length)
67 Chevelle (1st design) (July 1967) (Nov 1967)
67 Chevelle (10/66)
3921042
0.854 ROD, Pedal Push (used w/strg. col. w/lwr. brg. clamp)
67 Chevelle (2nd design) (July 1967) (Nov 1967)
Disclaimer:
Factory correct applications are your responsibility. GM made part and part # changes with no rhyme but a reason (no production interruptions at any cost).
Application charts are for replacement parts that were available at the time of parts book printing.
My observations come from the parts I have in my collection or other reliable sources your parts may differ.
If Factory correctness is your goal, do more research, join car clubs,
forums and buy an assembly manual if one is available for your Project Car (you wont be sorry).
This is a fun and interesting part of the hobby!
9774625 64-67 straight shaft (12 51/64" O.L.) replaced 3840835 08-65
Discontinued
3900524
0.854 ROD, Pedal Push (12 43/64 dev. Length)
67 Chevelle (1st design) (July 1967) (Nov 1967)
67 Chevelle (10/66)
3921042
0.854 ROD, Pedal Push (used w/strg. col. w/lwr. brg. clamp)
67 Chevelle (2nd design) (July 1967) (Nov 1967)
Disclaimer:
Factory correct applications are your responsibility. GM made part and part # changes with no rhyme but a reason (no production interruptions at any cost).
Application charts are for replacement parts that were available at the time of parts book printing.
My observations come from the parts I have in my collection or other reliable sources your parts may differ.
If Factory correctness is your goal, do more research, join car clubs,
forums and buy an assembly manual if one is available for your Project Car (you wont be sorry).
This is a fun and interesting part of the hobby!