#3892632
General Motors Part # 3892632 Clutch Release Fork
The following Pictures are of a New GM Clutch
release lever that I sell.GM utilized the "632" on a
variety of models and engine sizes from 1964 on.
Including All 64-72 Chevelles, All 67-72 Camaros,
All 68-72 Novas and 71-72 Full sized cars.
Top View
Bottom View
The lower push rod pocket is offset toward the
floorboard, and has a hole for a return spring.
Side View
This fork curves toward front of car for leverage,
and has no holes in the side rails.
Measure
The curve is approximately 2 1/2" from flat
Bearing Retainer Spring
Push Rod Pocket
Bearing Contact
Measurement
Measurement from tip of bearing end to center of
push rod pocket is 9 3/4", overall length is 10 1/4"
Applications
3892632
0.795 Fork, Clutch Release
64-72 Chevelle
67-72 Camaro
68-72 Nova, Chevy II
71-72 Pass. (Chevy)
70-72 ALL F & X /250 M.T. (Pontiac)
71-72 X / 307 M.T. (Pontiac)
History:
3892632 Replaced 3839859 02-67
Disclaimer:
Factory correct applications are your responsibility. GM made part and part # changes with no rhyme but a reason (no production interruptions at any cost).
Application charts are for replacement parts that were available at the time of parts book printing.
My observations come from the parts I have in my collection or other reliable sources your parts may differ.
If Factory correctness is your goal, do more research, join car clubs,
forums and buy an assembly manual if one is available for your Project Car (you wont be sorry).
This is a fun and interesting part of the hobby!
release lever that I sell.GM utilized the "632" on a
variety of models and engine sizes from 1964 on.
Including All 64-72 Chevelles, All 67-72 Camaros,
All 68-72 Novas and 71-72 Full sized cars.
Top View
Bottom View
The lower push rod pocket is offset toward the
floorboard, and has a hole for a return spring.
Side View
This fork curves toward front of car for leverage,
and has no holes in the side rails.
Measure
The curve is approximately 2 1/2" from flat
Bearing Retainer Spring
Push Rod Pocket
Bearing Contact
Measurement
Measurement from tip of bearing end to center of
push rod pocket is 9 3/4", overall length is 10 1/4"
Applications
3892632
0.795 Fork, Clutch Release
64-72 Chevelle
67-72 Camaro
68-72 Nova, Chevy II
71-72 Pass. (Chevy)
70-72 ALL F & X /250 M.T. (Pontiac)
71-72 X / 307 M.T. (Pontiac)
History:
3892632 Replaced 3839859 02-67
Disclaimer:
Factory correct applications are your responsibility. GM made part and part # changes with no rhyme but a reason (no production interruptions at any cost).
Application charts are for replacement parts that were available at the time of parts book printing.
My observations come from the parts I have in my collection or other reliable sources your parts may differ.
If Factory correctness is your goal, do more research, join car clubs,
forums and buy an assembly manual if one is available for your Project Car (you wont be sorry).
This is a fun and interesting part of the hobby!